Other material
Article

ISO3582 horizontal burning of small specimens

 
ISO3582 horizontal burning of small specimens subjected to a small flame – Standard 
ISO3582:Flexible cellular polymeric materials-Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame 

ISO3582 horizontal burning of small specimens subjected to a small flame – Scope
This International Standard specifies a small-scale laboratory screening procedure for comparing the relative horizontal burning characteristics of small test pieces of flexible cellular polymeric material exposed to a low-energy source of heat. It is intended only for the purpose of assessing quickly and simply the horizontal burning characteristics of small test pieces of the material as such, i.e. considered without reference to the environmental conditions under which the material, or products made from it, may be used. As a consequence, it is not possible to establish a correlation between the results of this test and the performance of such materials or products under actual service conditions. The test is restricted to test pieces of thickness greater than 5 mm. Results of tests on test pieces of different thicknesses are not comparable.

This test method is not intended to be used to assess the potential fire hazard in use.

NOTE  For cellular plastics having a density less than 250 kg/m3, another test method exists: ISO 9772:—1), Cellular plastics-Determination of horizontal burning characteristics of small specimens subjected to a small flame. The test equipment and procedures differ from those contained in this International Standard, and it should not therefore be assumed that they will produce identical test results.
 
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene  闽ICP备09009213号-1